Schaudt LT 52 - Alarms and Faults; Alarms

Instruction Manual for LT 52 Control Panel
8
Date: 01.03.2018 8310027 BA / EN
4 Alarms and faults
4.1 Alarms
It is best to carry out checks in the morning before 12V consumers are switched on.
Alarm Possible cause Remedy
The LT 52 LED panel
switches off by itself.
The ”11.0V”
L
ED and the
Risk of draining the leisure bat-
tery.
V
olta
g
eo
f
the leisure batter
y
The battery monitor in electro-
block EBL ... automatically swit-
ches off all consumers.
T
h
e
1
1
.
0
V
L
E
D
a
n
d
t
h
e
”Leisure battery” symbol
flashontryingtoswitchon
the LT 52 LED panel (only
EBL 226).
V
o
l
t
a
g
e
o
f
t
h
e
l
e
i
s
u
r
e
b
a
t
t
e
r
y
has fallen below 10.5V.
The battery must be charged im-
mediately (see above).
See the electroblock EBL... in-
struction manual. .
When the LT 52 LED panel is
switched on or off:
-- Voltage of the leisure battery
too low (less than 11.0V)
-- Voltage of the leisure battery
has fallen below 11.0V
When the
L
T52
L
ED
p
anel is
Switch off all 12V consumers.
W
h
e
n
t
h
e
L
T
5
2
L
E
D
p
a
n
e
l
i
s
switched off:
-- The LT 52 LED panel, and
hence the 12V supply to the
leisure area, can no longer
be switched on (to protect the
battery) when the leisure bat-
tery voltage is less than
10.5V.
-- The ”11.0V” LED and the
”Leisure battery” symbol flash
on trying to switch on the LT
52 LED panel (only EBL
226).
Charge the battery:
-- Start engine
or
-- connect to 230V power sup-
ply
Not for CSV 410-2:
When the LT 52 LED panel is
switched on or off:
-- Voltage of the starter battery
too low (less than 11.5V)
When the LT 52 LED panel is
switched on and on display of
the ”Starter Battery” voltage:
-- ThetworedLEDs(for
11 ... 11.5V) light up, or only
the lowermost LED (starter
battery voltage less than
11.0V).
Charge the battery:
-- Start engine
or
-- connect to 230V power sup-
ply