Scheiber BLOC 9 User Manual

SCHEIBER
2 Bellevue, 85120 Saint-Pierre du Chemin • France
Phone : +33 (0)2 51 51 73 21 • clients@scheiber.fr • sav@scheiber.fr • www.scheiber.fr
Domotique embarquée
Embedded home automation
Domotique embarquée
Embedded home automation
Acknowledgement...................................................P.2
Safety Warnings.........................................................P.2
Accessories / Associated references.................P.2
Equipment description..........................................P.3
Technical characteristics........................................P.4
Electrical characteristics.........................................P.4
Description of the markings used.....................P.4
Installation instructions..........................................P.6
Connection..................................................................P.6
Wiring............................................................................P.7
Operation....................................................................P.8
IBS sensor....................................................................P.8
Troubleshooting guide...........................................P.9
Terms and conditions.............................................P.10
Warranty terms.........................................................P.10
User Manuel & Troubleshooting Guide
BLOC 9
Réf : 41.70509.01

Scheiber BLOC 9 Specifications

General

Brand	Scheiber
Model	BLOC 9
Category	Control Unit
Language	English

Summary

Safety Warnings

General Safety Precautions

Crucial warnings cover device disassembly, impact, and safe unpacking to prevent injury and damage.

Equipment Description and Capabilities

Core Functionality and Output Control

Explains the Bloc 9's 6-function control, adjustable outputs (3-25A), and electrical protection features.

Technical Characteristics

Electrical Characteristics

Installation Instructions

General Installation Guidelines

Advises on placing the device in a ventilated, protected location away from heat and humidity.

Connection/Disconnection Warning

Explicit warning against performing connections or disconnections while the device is powered on.

Input and Output Connections

Details connection types and cross-sections for power supply, CAN BUS, and LIN BUS.

Wiring Procedures

Connecting Equipment Cables

Guidance on connecting controlled equipment cables to quick connectors based on the back view diagram.

Operation and Configuration

Initial Power-On Checks

Functionality Checks

Configuration Methods

IBS Sensor Data Interpretation

Reading Battery Measurements

Troubleshooting Guide

Forcing Electrical Function with Bypass Fuse

Procedure to force an output (e.g., S3) by installing the bypass fuse into the corresponding holder.