Scheiber BLOC 9 - Troubleshooting Guide; Forcing Electrical Function with Bypass Fuse

Domotique embarquée
Embedded home automation
P. 9
Domotique embarquée
Embedded home automation
Troubleshooting guide
Detach the Bypass fuse and connect it to the fuse holder 3
In order to force the electrical function in the event of any malfunction of Bloc 9, you must install the Bypass fuse on the output concerned.
In the following example we force exit S3 from Bloc 9.
S3 output
Bypass fuse 3 bracket
1
2
Bypass fuse
3
Remove the front cover
Locate the fuse holder corresponding to output 3