Scheppach AC10/8V - Page 34

www.scheppach.com · service@scheppach.com www.scheppach.com · service@scheppach.com
- Do not expose electric tools to rain.
- Do not use electric tools in a damp or wet environment. There is a risk of electric shock!
- Make sure that the work area is well-illuminated.
- Do not use electric tools where there is a risk of re or explosion.
3. Protect yourself from electric shock
- Avoid physical contact with earthed parts (e. g. pipes, radiators, electric ranges, cooling units).
4. Keep away from children!
- Do not allow other persons to touch the tool and cable, keep them away from your work area.
5. Securely store unused power tools
- Unused power tools should be stored in a dry, elevated or closed location out of the reach of children.
6. Do not overload your electric tool
- They work better and more safely in the specied output range.
7. Wear suitable clothing
- Do not wear wide clothing or jewellery, which can become entangled in moving parts.
- Rubber gloves and anti-slip footwear are recommended when working outdoors.
- Tie long hair back in a hair net.
8. Do not use the cable for purposes for which it is not intended
- Do not use the cable to pull the plug out of the outlet. Protect the cable from heat, oil and sharp edges.
9. Take care of your tools
- Keep your compressor clean in order to work well and safely.
- Follow the maintenance instructions.
- Check the connection cable of the electric tool regularly and have it replaced by a recognised specialist when
damaged.
- Check extension cables regularly and replace them when damaged.
10. Pull the connector out of the socket
- When the electric tool is not in use or prior to maintenance and when replacing tools such as saw blades, drills,
cutters.
11. Avoid inadvertent starting
- Make sure that the switch is switched o󰀨 when plugging the plug into an outlet.
12. Use extension cables for outdoors
- Only use approved and appropriately identied extension cables for use outdoors.
- Only use cable reels in the unrolled state.
13. Always remain attentive
- Pay attention to what you are doing. Remain sensible when working. Do not use the electric tool when you are
distracted.