www.scheppach.com
GB
|
29
4. If the grass gets caught in the blade during op-
eration, or if you need to check the unit or refuel
5. -
mediately stop the engine and check if something
is wrong with the blade. If so, replace the blade
with a new one.
6. If someone calls out while working, always be
7. Never touch the spark plug or plug cord while the
engine is in operation. Doing so may result in be-
8. -
tallic parts of the engine while the engine is in
operation or immediately after shutting down the
engine. Doing so may result in serious burns.
9.
engine and turn the machine to have the blade
facing away from your body.
10. Check that the cutting attachment stopped turn-
ing under the engine idle before starting to use
the machine.
6. Technical data
Cutting data grass trimmer
Cutting circle diameter
of line
420 mm
Cutting line diameter 2 x 2,4 mm
Cutting line length 4 m
6000 min
-1
Cutting data brush cutter
Cutting circle diameter of
blade
255 mm
Cutter blade thickness 1,4 mm
3
6800 min
-1
Power unit
Displacement 42,7 cm³
1,25 kW
acity 1100 cm³
Engine type 2-stroke engine, air-
cooled
Weight 8.2 kg
Lithium-Ion-Battery
Lithium-ion battery
system
20 V
50 min
Charging current 2,4 A
AC input of the charging
230 - 240 V
Battery capacity 2000 mAh / 37 Wh
Information concerning noise emission measured ac-
cording to relevant standards:
Sound pressure
Brush cutter: L
pA
= 85,7 dB
Grass trimmer: L
pA
= 94,6 dB
Sound power
Brush cutter: L
pA
= 105,7 dB
Grass trimmer: L
pA
= 108,6 dB
Uncertainty
PA
= 3 dB
The impact of noise can cause damage to hearing.
Vibration:
Grass trimmer: A
hv
= left 8,3 m/s
2
right 8,3 m/s
2
Brush cutter: A
hv
= left 8,1 m/s
2
right 8,1 m/s
2
PA
= 1.5 m/s
2
Reduce noise generation and vibration to a minimum!
•
•
•
•
•
•
• Wear gloves.
In these operating instructions we have marked
the places that have to do with your safety with
this sign: m
7. Before starting the equipment
Each time before use, check the following:
• That there are no leaks in the fuel system.
•
the safety devices and cutting devices are com-
plete.
• That all screws are securely fastened.
• That all moving parts move smoothly.
1. Fuel and oil
Recommended fuels
Use only a mixture of unleaded petrol and special
in the fuel mixing table.
Important: Do not use a fuel mixture which has been
stored for longer than 90 days.
Important: Never use 2-stroke oil with a recommend-
ed mixing ratio of 100:1. The manufacturer’s war-
ranty will be voided in case of engine damage due
To Next Page
Loading...
