www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
24
|
GB
Noise data
Sound power level L
WA
97.6 dB(A)
Sound pressure level L
pA
86.6 dB(A)
3 dB(A)
Vibration 2.356 m/s²
1.5 m/s²
Note:
The noise and vibration values are determined ac-
cording to EN 60745.
Wear hearing protection!
The measured total vibration values (triax vector
sum) are determined in accordance with EN 60745.
been measured according to the standard test stated
in the EN 60745 standard, and it is used to compare
The vibration level can be used for an initial evalua-
tion of exposure.
to the central uses of the device. However, if the de-
vice is used for further applications with other tool at-
-
values.
An estimation of the vibration exposure also needs to
include the times during which the device is switched
As a result, the
operational hours.
the device operator against the impact of vibrations.
These include: maintaining the device and its attach-
ments; keeping hands warm; well planned work pro-
cesses.
General information
• After unpacking check all parts for transport dam-
age. In the event of complaints the carrier must be
Later claims will not be rec-
ognised.
• Check whether the shipment is complete.
•
time.
• With accessories as well as wearing parts and re-
Replace-
• When ordering please provide our article number
equipment.
•
•
•
Additional safety instructions
a) Connect a vacuum cleaner to the supplied adapt-
b) Warning!
c)
mask when sanding, in particular during over-
head work and when processing critical materi-
als! When sanding certain materials (e. g. lead
Touching or
-
Notes regarding vibration and noise emissions
Keep the noise level and vibration to a minimum!
1.
2. Maintain and clean the power tool on a regular
basis.
3.
4. Do not force the power tool.
5.
6.
Residual risks
-
sidual risks still remain.
arise in connection with the design and construction
of this power tool:
a) Damage to health resulting from hand/arm vi-
brations if the device is used over an extended
maintained.
b)
from the power tool due to sudden damage, wear
or incorrect insertion.
c) Burns and cuts if the accessories are touched di-
6. Technical data
Dimensions L x W x H 380 x 260 x 260 mm
Wheel diameter 215 mm
Sanding wheel speed 1500 rpm
Max. sanding wheel speed 3200 rpm
Extraction hose length 1500 mm
Weight 3.4 kg
Engine 230/50 V/Hz
Nominal consumption P1 1200 W
To Next Page
Loading...
Need help?
General
