To Next PageTo Next Page
Why does my Scheppach Saw motor make excessive noise?
If the Scheppach Saw motor is making excessive noise, it could be because the coils are damaged or the motor is defective. Arrange for inspection of the motor by a specialist.
Why does the workpiece pull away or splinter when using my Scheppach HBS30 Saw?
If the workpiece pulls away or splinters when using your Scheppach Saw, it may be due to excessive cutting pressure or a saw blade not suitable for use. Try inserting a suitable saw blade.
Why does my Scheppach HBS30 leave burn marks on the wood?
If burn marks appear on the wood during cutting with your Scheppach Saw, it could be due to a blunt or wrong saw blade. Try changing the saw blade, or selecting a saw blade according to the operating instructions.
Why does my Scheppach HBS30 motor start slowly?
If the Scheppach Saw motor starts up slowly and does not reach operating speed, the voltage may be too low, the coils may be damaged, or the capacitor may be burnt. Contact the utility provider to check the voltage. Arrange for inspection of the motor by a specialist. Arrange for replacement of the capacitor by a specialist.
What to do if Scheppach HBS30 blade jams during cutting?
If the Scheppach Saw blade jams during cutting, it could be due to a blunt saw blade, deposits on the saw blade, or a poorly set guide. Try changing the saw blade, cleaning the saw blade, and setting the saw blade guide according to the operating instructions.
Why doesn't my Scheppach HBS30 Saw motor reach full power?
The Scheppach Saw motor may not reach its full power if the circuits in the network are overloaded by other equipment like lamps or other motors. Avoid using other equipment or motors on the same circuit to ensure the saw motor receives adequate power.
How to fix a rough or wavy saw cut with my Scheppach HBS30?
If your Scheppach Saw cut is rough or wavy, it could be due to a dull saw blade or a tooth shape that's not appropriate for the material thickness. Try resharpening the saw blade or using a more suitable saw blade.
What to do if my Scheppach Saw motor does not work?
If the Scheppach Saw motor isn't working, the motor, cable, or plug might be defective, the fuses might be burnt, or the housing cover might be open (limit switch). Check the fuses and replace them if necessary. Ensure the housing cover is closed exactly. Arrange for inspection of the machine by a specialist if the problem persists. Never repair the motor yourself due to the danger.
General| Product type | Vertical band saw |
|---|---|
| Product color | Blue, Grey |
| Built-in light | - |
| Adjustable speed | Yes |
| Housing material | Steel, Aluminium |
| Table bevel angle | 0 - 45 ° |
| Input power | 350 W |
| Power source | AC |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
| Cutting width | - mm |
| Cutting height @ 90° | 80 mm |
| Number of teeth per inch (TPI) | 6, 10, 15 |
Weight and Dimensions| Depth | 730 mm |
|---|---|
| Width | 420 mm |
| Height | 540 mm |
| Weight | 20500 g |
| Table depth | 520 mm |
| Table width | 300 mm |
Key safety measures for operating and maintaining the electric tool.
Lists potential risks and remaining hazards associated with the machine's use.
Lists the necessary tools for assembly and setup.
Step-by-step guide for attaching the saw table to the machine.
Instructions for attaching the table extension for wider workpieces.
Guide on how to attach and adjust the parallel fence for precise cuts.
Steps for aligning the saw band on the band wheels for optimal cutting.
How to set the upper and lower saw band guides for proper blade support.
Setting the upper saw band guide pins for blade alignment.
Tilting the saw table to achieve a precise 90-degree angle.
Guidance on selecting the appropriate saw band for different cuts.
Detailed steps for safely removing and installing a new saw band.
Instructions for operating the machine's power switch.
How to perform angled cuts by tilting the saw bench.
Step-by-step guide for cutting wood along its length.
Techniques for cutting curves and radii without guides.
