What to do if the Scheppach HL1000v Log Splitter hydraulic pump doesn't start?
If the hydraulic pump on your Scheppach Log Splitter isn't starting, there could be a couple of reasons. First, check the cable to ensure there is electric power. Second, the thermal switch of the motor may have cut off; if so, engage the thermal switch inside the motor casing.
Why won't the column move down on my Scheppach HL1000v Log Splitter?
Several factors can prevent the column from moving down on your Scheppach Log Splitter. It might be due to a low oil level, so check the oil level and refill if necessary. Another cause could be that one of the levers is not connected; verify the fixing of the lever. Finally, dirt in the rails can impede movement, so clean the column.
How to fix a Scheppach HL1000v Log Splitter when the motor starts but the column doesn't move down?
If the motor starts on your Scheppach Log Splitter but the column remains stationary, the issue might be the wrong turning direction of the 3-phase motor. Check the turning direction of the motor and change it if necessary.
General| Brand | Scheppach |
|---|---|
| Model | HL1000v |
| Category | Log Splitter |
| Language | English |
Covers pre-operation checks, work area safety, machine operation, and emergency procedures.
Observe warnings, maintain safety devices, check electrical leads, operator age, wear gloves.
Covers EC directive compliance, vertical splitting, log dimensions, and authorized personnel.
Covers the splitting procedure, log cutting rules, and efficient working methods.
Includes pre-operation checks and venting the hydraulic system.
Focuses on cable inspection, specifications, and hazards of defective cables.
Emphasizes disconnecting power, using correct tools, and not operating without safety devices.
Verify devices, do not remove/modify, follow instructions, never connect power during maintenance.
Covers material safety, professional disposal, and step-by-step dismantling instructions.
Addresses pump not starting, column not moving, or motor running without movement.
To Next Page