Scheppach MFH5300-4BP User Manual

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
GB
|
37
6. Technical data
MFH5300-4BP
Technical data
Cutting data grass trimmer
Cutting circle diameter of line
mm
450
Cutting line diameter mm
2 x 2.8
Cutting line length m
4
Speed grass trimmer max. min¹
7200
Cutting data brush cutter
Cutting circle diameter of
blade mm
255
Cutter balde thickness mm
1.4
Teeth quantity
3
Speed brush cutter max. min¹
8500
Cutting data hedge trimmer
Cutting circle diameter mm
24
Angle adjustment °
+90°/0°/-75° (165°)
Cutting length mm
400
Max. cutting speed max. min
-1
1550
Cutting data pole saw
Bar length mm
305
Cutting length mm
254
Cutter bar Type
Oregon 100SDEA318
Saw chain division
3/8"
Chain type
91PJ040X
Chain link thickness
1,27
Oil tank capacity cm
3
125
Speed Pole saw min. min
-1
4200
Power unit
Displacement ccm
51,7
Max. engine output kW
1300
Idle speed min
-1
3000
±300
Fuel tank capacity cm
3
960
Engine type
2-stroke engine, air-
cooled
Weight grass trimmer kg
11,98
Weight brush cutter kg
11,88
Weight pole saw kg
12,53
Weight hedge trimmer kg
13,20
Subject to technical changes!
Information concerning noise emission measured ac-
cording to relevant standards:
Sound pressure L
pA
= 97,3 dB(A)
Sound power L
WA
= 115,2 dB(A)
Uncertainty K
PA
= 3 dB(A)
Wear ear-mu󰀨s.
The impact of noise can cause damage to hearing.
Vibration
Grasstrimmer: A
hv
= Front 6,67 m/s
2
Rear 5,67 m/s
2
Brush cutter: A
hv
= Front 6,96 m/s
2
Rear 7,14 m/s
2
Hedge trimmer: A
hv
= Front 6,62 m/s
2
Rear 6,62 m/s
2
Pole saw: A
hv
= Front 6,62 m/s
2
Rear 3,99 m/s
2
Uncertainty K
PA
= 1,5 m/s
2
Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch o󰀨 the equipment when not in use.
• Wear gloves.
In these operating instructions we have marked
the places that have to do with your safety with
this sign: m
7. Before starting the equipment
Each time before use, check the following:
• That there are no leaks in the fuel system.
• That the equipment is in perfect condition and that
the safety devices and cutting devices are com-
plete.
• That all screws are securely fastened.
• That all moving parts move smoothly.
1 Fuel and oil
Recommended fuels
Use only a mixture of unleaded petrol and special
2-stroke engine oil. Mix the fuel mixture as indicated
in the fuel mixing table.
Important: Do not use a fuel mixture which has
been stored for longer than 90 days.
Important: Never use 2-stroke oil with a recom-
mended mixing ratio of 100:1. The manufacturer’s
warranty will be voided in case of engine damage
due to inadequate lubrication.
Important: Only use containers designed and ap-
proved for the purpose to transport and store fuel.
Pour the correct quantities of petrol and 2-stroke oil
into the mixing bottle (see scale printed on the bot-
tle). Then shake the bottle well.
Never use oil for 4-cycle engine or use water cooled
2-cycle engine. It can cause spark plug fouling ex-
haust part blocking or piston ring sticking.
Mixed fuels, which have been left unused for a pe-
riod of one month or more, may clog the carburetor
or result in the engine foiling to operate property. Put
remained fuel into an airtight container and keep it in
the dark and cool room.

Scheppach MFH5300-4BP Specifications

General

Brand	Scheppach
Model	MFH5300-4BP
Category	Power Tool
Language	English