Why does my Scheppach Grinder motor overheat easily?
Your Scheppach Grinder motor may overheat easily due to overloading or insufficient cooling. To resolve this, avoid overloading the motor and remove any dust to ensure optimal cooling.
What to do if Scheppach Grinder motor does not reach its full power?
If your Scheppach Grinder motor isn't reaching full power, it might be due to overloaded circuits in the network. Avoid using other equipment or motors on the same circuit to ensure the grinder receives sufficient power.
Why does my Scheppach Grinder motor make excessive noise?
If your Scheppach Grinder motor is making excessive noise, the cause may be damaged coils or a defective motor. Arrange for inspection of the motor by a specialist.
What to do if Scheppach Grinder engine runs slowly?
If your Scheppach Grinder engine runs slowly and does not reach the operating speed, this could be due to voltage being too low, damaged coils, or a burnt capacitor. Contact your utility provider to check the voltage. You should also arrange for a specialist to inspect the motor and replace the capacitor.
How to fix a Scheppach Grinder when the motor does not work?
If the motor of your Scheppach Grinder does not work, it could be due to a defective motor, cable, or plug, or burnt fuses. Check the fuses and replace them if necessary. Arrange for a specialist to inspect the machine. Never attempt to repair the motor yourself.
Identifies and lists all numbered parts of the device as shown in figures A and B.
Lists all parts and accessories included in the package with the tool.
Essential safety warnings and instructions for operating power tools.
Guidelines for maintaining a safe and hazard-free work environment.
Precautions related to electrical connections and protection against electric shock.
Recommendations for operator safety, including PPE and attentiveness.
Details technical specifications like voltage, input, speed, weight, and dimensions.
Provides measured noise and vibration emission values for safe operation.
Steps to take before operating the device for the first time.
Instructions for attaching the protective cover and the front handle.
Procedure for mounting or changing the brushing roller on the motor shaft.
Guidance on selecting the appropriate brushing roller for different tasks.
Routine cleaning and upkeep of the device for optimal performance.
Procedure and safety advice for replacing a damaged power cable.
Details on wearing parts and how to obtain spare parts and accessories.
Notes on motor overload protection and automatic switch-off.
Identifies risks associated with damaged cables and inspection requirements.
Guidance on environmentally friendly disposal of packaging materials.
Regulations for disposing of waste electrical and electronic equipment separately.
Lists common faults, possible causes, and recommended solutions.
States manufacturer details and compliance with EU directives and standards.
General| Power input | 1300 W |
|---|---|
| Disc diameter | 125 mm |
| No-load speed | 11, 000 rpm |
| Grinding wheel bore | 22.23 mm |
| Weight | 2.75 kg |
| Spindle Thread | M14 |
To Next Page
