Scheppach ox t500 User Manual

international7
m Trouble shooting
Problem Possible Cause Remedy
1. Motor stops starting Overload protection device disengaged
to protect the log splitter from being
damaged
Contact a qualified Electrician.
2. Fails to split logs a)Logisimproperlypositioned
b)Sizeoflogexceedsthecapacityof
the machine
c)Wedgecuttingedgeisblunt
d)Oilleaks
a)Referto”operation”sectionto
perfect log loading
b)Reducelogsizebeforeoperating
c)Sharpencuttingedge
d)Locateleak(s)andcontactyour
dealer
3.Logpushermovesjerkily,taking
unfamiliar noise or vobrating a lot
Lack of hydraulic oil and excessive air
in the hydraulic system
Check oil level for possible refilling.
Contact your dealer
4. Oil leaks around the cylinder ram or
ffrom other points
a)Airsealedinhydraulicsystemwhile
operating
b)Bleedscrewisnottightenedbefore
moving the log splitter
c)Oildrainboltisnottight
d)Hydrauliccontrolvalveassembly
and/orseal(s)worn
a)Loosenbleedscrewbysome
rotations before operating the log
splitter
b)Tightenbleedscrewupbefore
moving the log splitter
c)Tightentheoildrainbolt
d)Contactyourdealer
Legend for the symbols
attached to the machine
Wear working shoes and gloves!
Check the splitter for possible
damages before you start working!
Wear safety glasses!
Read the operating instructions carefully!
Please provide for the proper
disposal of waste oil!
Disconnect the mains plug prior to the
repair,cleaning,andmaintenanceof
the splitter!
Do not reach into the machine without
any protection!
Caution! Moving parts!
Risk of injury!
Keepyourdistance!

Scheppach ox t500 Specifications

General

Brand	Scheppach
Model	ox t500
Category	Log Splitter
Language	English