Scheppach TIGER 2000S - User Manual

Nachdrucke, auch auszugsweise, bedürfen der Genehmigung. Technische Änderungen vorbehalten. Abbildungen beispielhaft!
Art.Nr.
89490916 / 89490919 / 89490924 / 89490928 /
89490930 / 89490934 / 89490942
AusgabeNr.
89490916_0201
Rev.Nr.
25/10/2021
TIGER 2000S
ACHTUNG! Vor Inbetriebnahme die Bedienungsanleitung genau durchlesen!
CAUTION! Read the manual carefully before operating this machine!
ATTENTION! Lire la notice intégralement avant l’utilisation de la machine!
DE
Nass-Schleifsystem
Originalbedienungsanleitung
5
GB
Wet grinding system
Translation of original instruction manual
19
EE
Märglihvimissüsteem
Originaalkäituskorralduse tõlge
30
LT
Šlapio šlifavimo sistema
Originalios naudojimo instrukcijos vertimas
40
LV
Slīpēšanas sistēma mitrai slīpēšanai
Oriģinālās instrukcijas tulkojums
51
SE
Våtslipsystem
Översättning av originalinstruktionsmanualen
62
FI
Märkähiomajärjestelmä
Alkuperäisen käyttöohjeen käännös
72
DK
Våd-slibesystem
Oversættelse af den originale betjeningsvejledning
83

Summary

1. Explanation of the symbols on the device

2. Introduction

3. Device description

4. Scope of delivery

5. Proper use

6. General safety information

7. Technical data

8. Before commissioning

9. Installation instructions

9.1 Installation and setting

Instructions for machine setup and placement on a stable surface.

9.2 Sound test

Procedure to check the grindstone for cracks using a sound test.

9.3 Installing the grindstone

Steps for mounting the grindstone onto the grinding shaft.

9.4 Fitting the workpiece support

Attaching the workpiece support to the upper or side mount.

9.5 Installing the water tank

Steps for attaching and filling the water tank.

10. Operation

10.1 Grinding direction

Guidance on choosing grinding direction for different tasks and tool types.

10.2 Water tank

Instructions for filling, maintaining, and using the water tank.

10.3 Angle gauge

How to measure and set workpiece angles using the angle gauge.

10.4 Grinding with the fixture for chisel

Procedure for grinding chisels using the specific fixture.

10.5 Honing

Technique for honing using the leather honing wheel and grinding paste.

10.6 Grinding with the fixture for axes

Method for grinding axes using the provided fixture.

11. Cleaning and maintenance

Cleaning

Instructions for keeping the machine free from dirt and dust.

Maintenance

Information on the device's maintenance requirements and consumable parts.

Service information

Notes on consumables and obtaining spare parts and accessories.

13. Electrical connection

14. Disposal and recycling

15. Troubleshooting

Scheppach TIGER 2000S Specifications

General

Brand	Scheppach
Model	TIGER 2000S
Category	Grinder
Language	English