To Next PageTo Next Page
Why does my Scheppach TIGER 2000S motor overheat easily?
The Scheppach Grinder motor may overheat due to overloading or insufficient cooling. Avoid overloading the engine during grinding. Remove dust from the engine to ensure optimum engine cooling.
How to troubleshoot a Scheppach Grinder engine that does not run?
If the Scheppach Grinder engine doesn't run, the engine, cable, or connector might be defective, or the fuses could be burnt. Have the machine checked by a specialist and never repair the engine yourself. Check the fuses and replace them if necessary.
Why is my Scheppach TIGER 2000S Grinder engine producing excessive noise?
Excessive noise from the Scheppach Grinder engine could be due to damaged coils or a defective motor. Have the engine checked by a specialist.
General| Grinding Wheel Diameter | 200 mm |
|---|---|
| Grinding Wheel Width | 40 mm |
| Motor Power | 120 W |
| No-Load Speed | 120 rpm |
| Honing Wheel Diameter | 200 mm |
| Honing Wheel Width | 30 mm |
| Grain Size | 220 |
