Schertler DAVID X - Important Safety Information; Electrical Safety Precautions

ACOUSTIC XAMPS
IMPORTANT SAFETY
INFORMATION
SAFETY FIRST!
Safety is of major importance when operating any electrical equipment,
so please note the following:
On a product, a lightning ash within a triangle indicates the presence of
uninsulated “dangerous voltage” within the product enclosure. This may
be of sufcient magnitude to cause risk of electric shock.
ELECTRICAL SAFETY
 Before connecting your amplier to the mains, make sure that the mains voltage does not
exceed the voltage specied on the device.
 Do not use your amplier if its mains cable or plug are not in perfect condition. Replace these
as necessary. The replacement cable must be the same as the original.
 Your amplier should only be connected to a mains socket with a ground protection system.
 When using or installing your amplier, make sure that the mains socket and the amplier’s
mains cable and plug are easily accessible.
 Do not, under any circumstances, defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide blade and third prong are provided
for your safety. If the supplied plug does not t your mains socket, consult an electrician for
replacement of the obsolete socket.
 Do not expose your amplier to rain or any other water (even in small amounts). Do not use
the amplier near water.
 Avoid spilling drinks or any other liquids on the amplier.
 Do not operate your amplier in excessively humid conditions. Avoid excessive heat from
sunshine, re or similar. If the amp is being used in a dusty environment, make sure it is
adequately protected.
 Avoid using or installing your amplier near any heat sources such as radiators, heat registers,
stoves, or other heat-producing apparatus. Do not put any sources of open ame (e.g. candles
or pyrotechnics) on or near the amplier.
 Do not cover your amplier during use, or obstruct the ventilation ow in any way.
 Always leave sufcient clearance between the heat sink and any other surface.
 Unplug your amplier during lightning storms, or if it is not going to be used for a while.
(Remove the plug from the mains socket to completely disconnect the amplier.)
 Your amplier does not contain any “user serviceable” parts. Servicing and/or repairs should
only be carried out by qualied personnel. See MAINTENANCE AND REPAIR.