Schick CDR Wireless - General Description

1.4. General Description
Hardware in the CDR Wireless Sensor system performs the following actions.
•
Wireless Sensor -- Captures the image created when the Sensor is exposed
to radiation from an X-ray source.
•
Base Station Antenna / Receiver -- Receives, via wireless RF link, the
image acquired from the Wireless Sensor and sends it to the USB
Interface Unit. The unit is powered from the computer’s USB port.
•
Base Station USB Interface -- Communicates, via wired USB link, with
attached computer hardware, enabling acquired images to be displayed on
a computer monitor or other display system. The unit is powered from the
computer’s USB port.
Software used with the CDR Wireless system performs the following actions.
•
Wireless Sensor Driver, supplied with your system, acquires images
captured by the Wireless Sensor. It also optimizes image quality for
display on a computer monitor.
•
Wireless Tools, Wireless Monitor, and Diagnostic utilities, supplied with
your system, monitor, configure, and diagnose the system.
•
CDR Application Software (version 2.6 or DICOM for Windows),
optional and available separately, provides the user with advanced features
for image review, manipulation, printing, and storage.
2 B1051301 Rev. - (DRAFT) CDR Wireless User Guide