Schiit Freya+ F - Page 2

Freya+ F is a no-compromise, ultra-
high-end balanced preamp—combined
with the latest unied control system,
Forkbeard™.
Freya seamlessly blends the highest
tech—unied app control—with a pure
triode, Class A tube preamp...that also
happens to include an exceptional
passive mode, with a switchable
discrete differential buffer for
unsurpassed exibility.
Add this to a relay-switched stepped
attenuator, smart features like tube
shutdown when you’re not using them,
and cost-no-object features like two
transformers, DC heaters, and a 300V
main tube rail, and you’ll discover that
Freya stands up to preamps costing
much, much more.
INTRODUCTION
The following is required by the roughly 9,542
government agencies and regulations we have
to comply with. If you have some common
sense, they should seem pretty straightforward. In any
case, read these instructions before proceeding farther,
follow all instructions, and heed all warnings. Or else!
1. If you don’t know how to install audio devices, get a
qualied professional to help.
2. Never use this device near water, and clean only with
a dry cloth.
3. Assure adequate ventilation, do not block any
ventilation openings, or place near heat sources.
4. Use only the supplied power cord or suitable
replacement. Route cords away from trac areas and
protect them from being pinched. Unplug the cord from
the outlet if the apparatus is unused for a long period
of time.
5. To prevent electric shock, do not use the plug with an
extension cord, receptacle, or outlet unless blades can be
fully inserted.
6. Refer all servicing to qualied service personnel. Service
is required when the device has been damaged, including
cord or plug damage, liquid has been spilled or objects have
fallen into the device, the device has been exposed to rain or
moisture, does not operate normally, or has been dropped.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE
TO RAIN OR MOISTURE.