Do you have a question about the Schiit Valhalla 2 and is the answer not in the manual?
Lists all components included in the Valhalla 2 headphone amplifier package.
Essential safety precautions, warnings, and compliance statements for operating the Valhalla 2.
Step-by-step guide for installing and replacing vacuum tubes for optimal performance.
Detailed explanation of the volume knob, power LED, headphone jack, and tube heat.
Guide to RCA inputs, preamp outputs, gain switch, power input, and safety disclaimers.
Answers to common issues like hum, noise, popping, and operational sequence for amp interaction.
Guidance on tube compatibility, replacement, and advice on extending tube lifespan.
| Type | Tube Headphone Amplifier |
|---|---|
| Input Impedance | 50kOhms |
| Output Impedance | 14 ohms |
| Crosstalk | -70dB, 20 Hz-20KHz |
| Power Consumption | 30W |
| THD | Less than 0.1% at 1V RMS |
| Topology | Class A |
| Inputs | RCA |
| Outputs | 1/4" Headphone Jack |
| Tube Complement | 6N6P dual triode x 2 |
Loading...