To Next PageTo Next Page
Need help?Do you have a question about the Schiit Saga+ and is the answer not in the manual?
Lists the items included with the Saga+ preamp, such as the unit, power cord, and tube.
Provides essential safety instructions and warnings for operating the audio device.
Guides users through inserting the tube, connecting sources, and powering on the preamp.
Details the procedure for safely removing and installing vacuum tubes in the Saga+.
Explains the selected input indicators and the input switch button.
Describes using the volume knob and the mode select button for output switching.
Explains the IR window, mute indicator LED, and passive/buffer indicator.
Details how to use the remote for input selection, volume, output mode, and mute.
Provides step-by-step instructions for replacing the battery in the remote control.
Explains how to connect audio sources via RCA inputs and outputs to amps or subwoofers.
Details the on-off switch and AC power input, emphasizing correct voltage usage.
Addresses common problems like hum, lack of immediate sound, clicking, and power failures.
Clarifies operational aspects like leaving the unit on, using dual outputs, and faint music at low volume.
Outlines the product warranty period, coverage, and limitations on claims.
General| Type | Preamplifier |
|---|---|
| Inputs | 5 x RCA |
| Volume Control | Relay-switched stepped attenuator |
| Frequency Response | 20Hz-20Khz, +/-0.1dB |
| Dimensions | 9 x 6 x 2 inches |
| Remote Control | Yes |
| Crosstalk | -80dB, 20 Hz-20KHz |
| Output Impedance | 75 ohms |
| Input Impedance | 50K ohms |
| Tube | 6SN7 |
| Outputs | 2 RCA single-ended |
| Gain | 1 (0dB) |
