Do you have a question about the Schiit FREYA S and is the answer not in the manual?
Lists all items included in the product packaging.
Connect balanced sources via XLR cables to two sets of inputs.
Connect single-ended sources via RCA cables to three sets of inputs.
Connect to external amplifiers or speakers using XLR connections.
Connect to external amplifiers or speakers using RCA connections.
Describes the power switch and IEC power inlet location and function.
Explains the function of various status and gain indicator LEDs.
Details the passive, Nexus 1X, and Nexus 4X output stage options.
Describes how to select inputs and adjust volume using the knob.
Covers the remote control window and the status indicator light.
Explains buttons for input selection, volume adjustment, and output mode.
Details the mute function and the process for replacing the remote battery.
Addresses common hum and hiss issues and their solutions.
Explains single-ended/balanced conversion, output mode pops, and dual output usage.
Clarifies startup delay, volume clicking, and faint music when volume is low.
Provides guidance for power-related issues and general troubleshooting.
Instructions on how to contact Schiit Audio for warranty service.
Details conditions and limitations that may void the product warranty.
| Type | Preamplifier |
|---|---|
| Input Impedance | 50K ohms |
| Outputs | XLR balanced, RCA single-ended |
| Maximum Output | 10V RMS |
| Frequency Response | 20Hz-20kHz, -0.1dB |
| Crosstalk | -80dB, 20 Hz-20KHz |
| Output Impedance | 75 ohms |
| Gain Stage | Tube |
| Power Supply | Internal regulated |
Loading...