Schiit MAGNI - User Manual

headphone amp and preamp
In norse mythology, magnI was one of thor’s sons.
thIs Is the thIrd generatIon of our magnI. no relatIon.
yes, we know, you’re dIssapoInted.
Console yourself by knowIng you have, by far,
the best amplIfIer anywhere near Its prICe.
MAGNI
owner’s manual

Summary

Product Introduction

Getting Connected

Connect Audio Source

Connect your audio source to the Magni's RCA input jacks using high-quality RCA cables.

Connect Power Supply

Connect the supplied 14VAC wall-wart cable to the designated power jack; do not use other adapters.

Preamp Output Connection

Optionally connect the preamp outputs to powered monitors or an external power amplifier.

Power On Procedure

Turn on the switch; the protection relay will mute output for 15-20 seconds before engaging.

Gain Setting

Select HI or LO gain based on headphone sensitivity for optimal volume control range.

Operation

Headphone Connection

Connect headphones to the jack marked with a headphone icon; use a 1/8" to 1/4" adapter if needed.

Volume Adjustment

Turn the knob to control volume for both headphone and preamp outputs.

Warranty Information

Schiit MAGNI Specifications

General

Type	Headphone Amplifier
Crosstalk	-75dB, 20 Hz-20KHz
Weight	1 lb
Power Supply	16VAC wall-wart AC transformer
Dimensions	5 x 3.5 x 1.25 inches