To Next PageTo Next Page
Need help?Do you have a question about the Schiit JOTUNHEIM and is the answer not in the manual?
Lists Jotunheim unit, power cord, and stick-on feet.
Essential safety guidelines covering water, ventilation, power cords, and professional servicing.
Steps for connecting and operating Jotunheim as a standalone amplifier.
Instructions for connecting the optional DAC card via USB, including driver needs.
Guide for connecting a turntable to the phono card, including grounding.
Information on potential future module releases and installation options.
Explains front panel controls: input switch, gain switch, volume knob, power LED.
Details SE (1/4") and Balanced (XLR) headphone outputs and their usage.
Describes card input, ground lug, balanced/SE inputs, and preamp outputs on the rear.
Details AC power input and the on-off switch operation.
Solutions for hum, delayed sound, and input selection problems.
Fixes for USB connectivity, driver issues, and power-on problems.
Terms, coverage, limitations, and claim process for the product warranty.
Information on CE application and declared conformity standards.
General| THD | <0.001%, 20Hz-20kHz, at 1V RMS |
|---|---|
| IMD | <0.001%, CCIF |
| Input Impedance | 50k ohms |
| Power Consumption | 30W |
| Inputs | XLR, RCA |
| Outputs | 1/4" |
| Topology | Fully discrete |
| Gain | Low (1), High (5) |
| Frequency Response | 20Hz-20kHz |
| THD+N | <0.002%, 20Hz-20kHz at 1V RMS |
| SNR | >115dB |
| Crosstalk | -80dB, 20Hz-20kHz |
| Output Impedance | <0.1 ohms |
| Dimensions | 9 x 6 x 2 inches |
