Do you have a question about the Schiit Modius and is the answer not in the manual?
Connect to your balanced-input amp or preamp using XLR cables, or with RCA cables.
Connect to AES, Coaxial, or Optical digital sources using appropriate cables.
Connect a USB source using the supplied USB micro cable for data and power.
Connect a 5V power source if external power is needed, especially for non-USB inputs.
Use as USB DAC or with other digital inputs requiring external power.
Button to cycle inputs and LEDs indicating selected input and power status.
Use balanced XLR and single-ended RCA outputs simultaneously and independently.
Address 'too much power' errors and no sound issues.
Details on warranty coverage, limitations, and service contact information.
List of included items: Modius, 5V USB Wall-Wart, USB Micro Cable.
| DAC Chip | AKM AK4493 |
|---|---|
| Outputs | RCA, XLR |
| Output Impedance (RCA) | 75 ohms |
| Frequency Response | 20Hz-20kHz, +/-0.1dB |
| Dimensions | 9 x 6 x 1.5 inches |
| Output Level (RCA) | 2.0V RMS |
| Output Level (XLR) | 4.0V RMS |
| Weight | 1 lb |
| Product Type | Digital-to-Analog Converter (DAC) |
| Inputs | USB, Coaxial, Optical |
| USB Input | USB Type B |
| Maximum Sample Rate/Bit Depth via S/PDIF | 24-bit/192kHz |
| THD+N | <0.0005%, 20Hz-20KHz, at full output |
| SNR | 120dB |
Loading...