8 Technical Data
8.10 Overview menus
Page 76
Art. no.: 2.511279 Rev. d
FRED
®
easyport
®
plus
8.10 Overview menus
Menu/parameters Sub menu/Parameter Sub menu/Parmeter Sub menu/Parmeter/details
Selftest >>> all tests (2.5.2 Performing manual
self-test
--
Bluetooth pairing Start - see service manual
Device information >>> (S/N; RefNr; Device Name; SW and HW versions; Pads Expired date; Maintenance date; Guidelines; Battery
>>>; Bluetooth >>>; SDM Settings Name
Device Settings >>>
8.11 Device Settings
Shock settings >>>
8.11.1 Shock setting
Energy adult/children 1/2/3
CPR settings >>>
8.11.2 CPR setting
Start with analysis
Show CPR timer
CPR Timer counting
Metronom AED
Metronome Ratio
Metronome Rate
Manual Setting >>> Following only for Manual AED:
Metronome
Metronome ratio
CPR Voice prompts
CPR feedback settings >>>
8.11.3 CPR Feedback
Limits >>>
Feedback delay
CPR Voice prompts
Average Rate Max CPR
Enable Recoil
Rate limits >>>
Depth limits adult >>>
Depth limits paediatric >>>
Communication >>>
8.11.4 Communication
SDM >>>
SEMA >>>
-
Transmission mode >>>
8.11.5 Transmission mode
Media
Auto power on
Auto start
-
System settings >>>
8.12 System Settings
Local settings >>>
8.12.1 Local Settings
Language, Country, Date, Time, Time-
zone, Time Sync etc
Base settings >>>
8.12.2 Base Settings
Maintenance >>> (Year month)
Length Unit (metric/inches);
Monitor enable;
Device name
Selftest settings >>>
8.12.3 Self-test Settings
RTU Wakeup
Interval for test
Auto RTU send
Volume Low/Mid/High
Shock Pacer markers Off/On
Auto Switch off time
8.11.6 Parameter in the Device Set-
tings menu
-
Restore Factory Defaults Start -
Import settings Start -
Import settings from SDM Start -
Export settings Start -
Export settings from SDM Start -
Device update >>> Install Firmware data and bootloader
SW version >>>
see service manual
Pads expired >>> Year/Month - 3.2.4 Pads expired
Production >>> Metronome CPR Time and breath
time (number of breath)
see service manual
Log Files >>> Start see service manual
To Next Page
Loading...
