Schindelhauer Bikes Viktor - Service- and maintenance intervals

36
EN
Component Task/Activity Before every ride Monthly Annually Other interval
Tires
Check tire pressure
Skid depth control
Check for ruptures on the sidewall
o
o
o
Brakes Control brake pad thickness
o
Brake cables/-lines Visual check
x
Aluminum fork
Check
Replace
x min. biannual
x after crash or every 3 years
Gates belt
Visual check
Check tension
o
o
Single speed-hub
Check bearing play
Grease freehub body
x
x
Inner bearing
Check bearing play
Grease (frame thread)
x
x
Pedals
Check bearing play
Control grip tape / replace if necessary
o
o
Crank Check and retighten
x
Paintnish Conserve
o
Wheels / spokes
Control true run
Check spoke tension
o
o
Handlebar/ stem
Check for bends and cracks
Replace
x min. biannual
x after crash or every 3 years
Headset bearing Check bearing play
o
Metallic surfaces Conserve (exception: Brake disks!)
o
Service- and maintenance intervals
After an initial break-in period, your bike will have to be maintained and
serviced in regular intervals and certain components will have to be
checked and/or replaced. Ideally, your Schindelhauer Bikes dealer should
perform this maintenance. The intervals stated in the following table are
meant to function as a guide for people that travel an annual distance of
1500-2500 km with their bike. More frequent use or bad street conditions
mean these intervals have to be shortened accordingly.
o With adequate technical- and mechanical comprehension, you
may carry out these operations on your own.
x Your Schindelhauer dealer should carry out these operations.