Schindelhauer Bikes Viktor - Tightening torques; Care instructions; List of potential wear parts

38
EN
Care instructions
List of potential wear parts
1. Please free your bike regularly from dirt. Please don‘t wash your bike
with a high-pressure cleaner but by hand wash.
2. If your frame is a pure aluminum one, it can turn matt or grey after some
time. If so, the frame can be brushed with steel wool or scotch brite pad
to return to original state. Please don’t brush over the logos.
3. To ensure a long durability of tires please keep the tire pressure as
stated on the sidewalls of the tire.
4. If your bike is featured with a leather saddle please note the enclosed
Brooks™ care instructions.
5. The polished bike parts should be treated with adequate caring products
once in a while to avoid discolorations.
6. For further information please contact your specialist dealer.
• Brake pads
• Tires and tubes
• Front and rear sprocket
• Tooth belt
• Rims (especially at the sidewalls)
• Bearings
Tightening torques
Description Thread Torque Tool
Hub bolts FW* M6 8 Nm Allen key 5mm
Hub bolts RW* M6 12 Nm Allen key 5mm
Stem/ head tube clamp M6 10 Nm Allen key 5mm
Stem/handlebar clamp M5 5 Nm Allen key 4mm
A-Head cap M6 2-4 Nm Allen key 5mm
Brake caliper (frame, fork) M6 8-10 Nm Allen key 5mm
Brake lever (handle bar) M5 4 Nm Allen key 4mm
Brake pad (brake caliper) M5 5-7 Nm Allen key 4mm
Cable clamp (brake caliper) M6 4-5 Nm Allen key 5mm
Seat clamp M6 8 Nm Allen key 5mm
Seat post clamp* (frame) M6 8 Nm Allen key 5mm
Front sprocket (crank) M8x0,75 15 Nm Allen key 5mm
Rear sprocket RW
(xedgear)
M5 6-8 Nm Torx 25
Rear sprocket RW
(free-wheel lockring)
BSA 40 Nm
Hookwrench or
SHB-Tool
Pedals* 9/16“ 35 Nm Allen key 6mm
* always apply grease