The emergency battery jump start can be used if your battery is dead to unlock your door. Do not
remove the battery until you have opened your door.
WARNING: The lock will remain unlocked until you change the battery or manually relock the door
from the inside!
1. Connect a new high-quality alkaline 9 volt battery to the contacts below the touchscreen keypad.
Keep the battery connected to the jump start contacts as you unlock your door.
2. Enter a User Code into the keypad.
3. Rotate the thumbturn toward the hinges.
4. Replace the dead battery with the new 9 volt battery.
Questions about your new
Keyless Touchscreen Lock?
Please don’t return it to the store!
Let us help you first!
https://instructions.allegion.com/instr/156/0
Schlage Touch Keyless Touchscreen Deadbolt Lock BE375 User Manual – Optimized PDF
Schlage Touch Keyless Touchscreen Deadbolt Lock BE375 User Manual – Original PDF
Related Manuals:
1. Schlage Keyless Touchscreen Deadbolt [BE375] Instructions Manual Instructions Instructions
Schlage Keyless Touchscreen Deadbolt [BE375] Keyless Touchscreen...
2. Schlage Connect Touchscreen Deadbolt with Alarm User Manual Schlage Connect Touchscreen
To Next Page
Loading...
