Contents [ hide
1 Prepare for Installation
1.1 A. Check door dimensions.
1.2 B. Adjust bolt length, if necessary.
1.3 C. Change faceplate, if necessary.
2 Install Lock
2.1 1. Install the bolt.
2.2 2. Install the touchscreen on the outside of the door.
2.3 3. Install the thumbturn assembly.
2.4 4. Install the included battery.
2.5 5. Install reinforcement plate and strike into door jamb.
3 Test Lock
4 Basic Programming Functions
5 Battery Jump
6 Related Manuals:
Prepare for Installation
Tools Needed
Phillips screwdriver
Tape Measure
To Next Page
Loading...
