Planning an Installation
12
The HandPunch is also available with an optional modem module for telephone line
communications between the HandPunch network and the host computer. When
connecting via modem, one HandPunch terminal must be configured with the modem
option. This terminal will communicate with the host computer.
To make the modem connection, a telephone jack must be installed on or in the wall
behind the modem HandPunch terminal. Position the RJ-11 jack location using the
template provided in this manual (see Figure 3-2 on page page 15). The short black cable
provided with the modem HandPunch connects the terminal to the telephone jack. Figure
4-4 on page page 19 a wiring diagram for a modem to host computer connection.
Modem Host
Computer
Connection
To Next Page
Loading...