Schlage HandPunch 2000 - Page 41

HandPunch 2000 Manual
39
There are three commands available from the Enrollment command menu.
• Add Employee
• Add Supervisor
• Remove User
Refer to “Table 12” to identify the command you need to perform. Step through all
previous commands until you reach the desired command.
Table 8: Enrollment Command Menu
Service Menu
Password = 4
Add Employee
ID #
Add Supervisor
ID
Remove User
ID
The Add Employee command allows you to enroll a new employee into the HandPunch.
The Add Supervisor command allows you to enroll a new supervisor into the HandPunch.
The Remove User command allows you to remove an employee or supervisor from the
HandPunch.
Enrollment
Commands
Add Employee
Add Supervisor
Remove User