STEUEREINHEIT AIRBASIC 2 –GEBRAUCHSANWEISUNGEN
AIRBASIC 2 CONTROLLER – USER MANUAL
28
1. Introduction and safety
The AirBASIC2 controller is designed specifically for use in the Schneider Druckluft rotary screw air compressors.
This manual gives instructions on correct and safe operation of the AirBASIC2 controller. For more information on
operating the compressor, please refer to the operation and maintenance instructions of the compressor.
Read these and other instructions delivered with the compressor carefully before taking your screw
compressor into use. This ensures correct preparations and use from the very beginning.
1.3. Storing the Books
All the instructions in this manual have been provided to guarantee a long life and reliable operation of your screw
compressor.
Always keep the manual available near the compressor. Make sure that the compressor is operated and serviced
according to the instructions.
1.4. Safety
Note! Always read also the safety instructions for transport, implementation, use and maintenance
presented in the operation and maintenance instructions of the compressor.
Always read the safety instructions before starting to work.
The instructions in this manual concerning safety are marked with this symbol.
In addition to these instructions, the local regulations in your country may impose additional requirements that must
be observed.
To Next Page
Loading...
Need help?
General