SCHUBERTH E1 User Manual

EN
1. STANDARD
The E1 conforms to the ECE-R 22.05 standard. This testing norm
guarantees conformity to dened safety standards in respect of impact
absorption, visor, retention system and eld of vision. The certication
applies to all the countries of the European Union and all countries that
recognise the ECE standard. It also guarantees conformity with all insurance
requirements that are important in the event of a claim.
Please note that this E1 with ECE approval is not certied for the USA,
Canada or any other EU countries. It is only permitted for use in countries
where the ECE standard is valid.
Note:
The only
SCHUBERTH helmets that it is legal to use in the USA,
Canada or other non-EU countries are those with the appropriate
approval and technical specications.
Further information and details of sales outlets for these helmets
can be found on the internet.
2. ECEAPPROVAL
ECE test standard
Certication number
Certifying authority
Serial number
051234/P-1234
05123456
C. THE HELMET
3. ANATOMY OF THE HELMET
4. OUTER SHELL
The outer shell of the E1 helmet combines an aerodynamically optimal shape
with consistent protection. It consists of a special glass-bre reinforced
duroplastic matrix developed by SCHUBERTH, which gives the helmet the
high level of strength needed for your protection.
Caution:
The safety helmet is designed to absorb the eects of only one impact.
The helmet must be replaced after a fall, accident or any other impact.
5. INNER SHELL
For optimised impact absorption properties, the inner shell of the helmet
consists of several components. The complex multi-segment foam padding
of the main body provides better absorption and dissipation of impact forces
and gives you the highest level of safety. The large side panels ensure the
helmet sits optimally and comfortably.
Shield
Face shield
Reective panels
Sun visor
Inner lining
Head ventilation
Face shield ventilation
Chin ventilation
Chin bar release
Integrated antennas
Head ventilation
Inner shell
Anti-fog lens
Shield unlocking/
Visor mechanics
Position lever for shield
Outer shell
Retention system
(with anti-roll-o system)
Operating slide for
sun visor
Chinstrap buckle

SCHUBERTH E1 Specifications

General

Shell Material	Fiberglass composite
Ventilation	Multi-channel ventilation system
Safety Standards	ECE 22.05
Pinlock	Included
Intercom	Prepared for SCHUBERTH SRC-System
Visor	Anti-scratch
Interior	Removable, washable
Closure System	Micro-lock ratchet
Bluetooth Compatibility	Yes
Chin Vent	Adjustable