16
7. ADDITIONAL WIND DEFLECTOR
The additional wind deector prevents the unpleasant eect of the wind
created as you ride owing into the helmet. In addition, the riding noise in the
helmet is reduced.
The wind deector is attached by velcro strips
on the inside of the acoustic collar and can be
removed when required to provide an additional
ow of fresh air, especially in hot weather.
Tip:
The t of the bottom of the helmet is extremely important in ensuring
that the helmet is as quiet as possible. If you have a smaller neck size, we
recommend that you also wear a scarf.
8. CHINSTRAP WITH MICROLOCK RATCHET FASTENERS
The S3 is tted with a ratchet strap. This locking
system is easy to use and enables you to adjust the
chinstrap perfectly to your head every time you put the
helmet on.
ADJUSTING THE CHINSTRAP
The length of the chinstrap is adjusted by increasing or reducing the length of
strap pulled through the metal buckles. Adjust the length of the chinstrap so
that it ts rmly but comfortably under your chin.
C. THE HELMET
To Next Page
Loading...
