SCHUBERTH S3 - Additional Safety Features

EN
35
VENTILATION SYSTEM 5  INTERIOR AIR EXTRACTION
The S3 is equipped with an innovative
air extraction system. Fresh air owing in
through the head vent is directed via the air
channels in the inner shell to the back of the
helmet. The reduced pressure that prevails
at the back of the helmet ensures that the
air is constantly sucked out through the air
vents and special netting material tted
to the neck pad, thus guaranteeing a
pleasant climate inside the helmet.
13. ADDITIONAL SAFETY FEATURES
REFLECTIVE PANELS
Black reective patches on the neckroll and forehead area make the
motorcyclist more visible. With solid-colour helmets (no decals) the
SCHUBERTH logo on the back and the SCHUBERTH lettering in front of the
helmet are also made of reective foil. In addition, there is a reective application
on the wind deector, which provides better visibility when driving with the
open chin bar.
Note:
Keep the reective safety areas clean.
Note:
When riding in France, local law requires that further reective safety
stickers be attached to the front, back and both sides of the helmet.
Note:
Please note the information on the handling of the chin strap.
C. THE HELMET