EN
19
Open the visor for this purpose
• the city position is usually skipped
• but it is easy to nd this position by moving it downwards again. The visor
mechanism requires no additional lubrication. The visor can be operated at any
time irrespective of the position of the sun visor.
CLOSING THE VISOR
To close the visor, grip the nger tabs at top
left and right and press the visor down with
one movement until it audibly locks into place.
REPLACING THE VISOR
Changing the visor is easy to do without tools using the convenient EasyChange
mechanism. To replace the visor, it is helpful to place the helmet on a at
surface or on your lap while seated.
Removing the visor
1. Move the visor into the highest locked
position.
C. THE HELMET
To Next Page
Loading...
