28
4. Pulling the three pins out of the
corresponding plug-in devices.
5. Repeat step 2 to 5 to remove the cheek pad
on the other side.
Removing the head pad
1. Loosen the pins of the forehead padding
and pull it out of the 4 holders.
2. Loosen all 4 pins of the upper head pad as well as
the 2 pins of of the left and right side pads.
3. For the side pads, loosen the 2 pins and the velcro
connection to the EPS.
C. THE HELMET
To Next Page
Loading...
