SCHUBERTH SC1 User Manual

SC1
17
English
6.3 GPS Navigation
6.3.1 GPS Pairing
1. To enter the voice conguration menu, press and hold the (+)
Button or the (-) Button for 10 seconds until you hear the voice
prompt, “Conguration menu”.
2. Tap the (+) Button until you hear a voice prompt, “GPS pairing”.
3. Search for Bluetooth devices on the GPS navigation. Select the
SC1 in the list of the devices detected on the GPS.
4. Enter 0000 for the PIN. Some GPS navigations may not ask for
the PIN.
5. The mobile phone conrms that the pairing has completed and the
SC1 is ready to use. You will hear a voice prompt, “Your headset
is paired”.
Note:
When Audio Multitasking is enabled, if you pair your GPS device via GPS Pairing,
its instructions will not interrupt your intercom conversations, but will overlay
with them.
6.4 Sena SR10, Two-Way Radio Adapter
You can use a two-way radio and the SC1 Bluetooth intercom
simultaneously by using the Sena SR10, a Bluetooth Two-way Radio
Adapter (please refer to section 5.2, “Second Mobile Phone Pairing -
Second Mobile Phone, GPS, and SR10” ). Incoming audio from the two-
way radio will not interrupt an intercom conversation but is heard in the
background. This is useful when you have an intercom conversation
with a passenger on the back seat and use a two-way radio for group
communication with other motorcycle riders.

SCHUBERTH SC1 Specifications

General

Brand	SCHUBERTH
Model	SC1
Category	Automobile Accessories
Language	English