SC1
41
English
17 TROUBLESHOOTING
17.1 Intercom Failure
When you try to start an intercom conversation with an intercom friend
who is unavailable within range or already having a conference intercom
with other riders or a mobile phone call, you will hear a low tone double
beep signifying an intercom busy signal. In this case, you have to try
again later.
17.2 Intercom Reconnection
If your intercom friend goes out of range while having an intercom
conversation, you may hear static noise and eventually the intercom will
be disconnected. In this case, the SC1 automatically tries to reconnect
the intercom every 8 seconds and you will hear high tone double beeps
until the intercom is reestablished. If you do not want to make a
reconnection, press and hold the (-) Button for 1 second to stop the
attempt.
17.3 Factory Reset
If you want to restore the headset to factory default settings, use the
Factory Reset in the conguration menu. The headset automatically
restores the default settings and turns o. Please refer to
section
14.1.10, “Factory Reset”
for more details.
To Next Page
Loading...
Need help?
General
