SCHUBERTH SC1 User Manual

SC1
32
13 FUNCTION PRIORITY
The SC1 operates in the following order of priority:
(highest) Mobile phone
Intercom/FM sharing
Music sharing by Bluetooth stereo music
Bluetooth stereo music
(lowest) FM radio
A lower priority function is always interrupted by a higher priority
function.
Note:
If you select music as the audio source priority, the order of priority will change
as below:
(highest) Mobile phone
Bluetooth stereo music
Intercom/FM sharing
Music sharing by Bluetooth stereo music
(lowest) FM radio
14 CONFIGURATION SETTING
14.1 Headset Conguration Setting
You can set the conguration of the SC1 by the voice menu instruction
described below.
1. To enter into voice conguration menu, press and hold the (+)
Button or the (-) Button for 10 seconds until the LED shows solid
blue and you hear high toned double beeps. You will also hear a
voice prompt, “Conguration menu”.
2. Tap the (+) Button to navigate between the menus. You will hear
voice prompts for each menu item as below.
3. You can enable/disable a feature or execute a command by tapping
the (-) Button.
4. If no button is pressed within 10 seconds, the SC1 will exit the
conguration and go back to stand-by mode.
5. If you want to exit the conguration immediately, tap the (+) Button
until you hear a voice prompt, “Exit conguration”, and tap the
(-) Button.

SCHUBERTH SC1 Specifications

General

Brand	SCHUBERTH
Model	SC1
Category	Automobile Accessories
Language	English