To Next Page

To Previous Page

SC1

14.1.11 Exit Voice Conguration Menu

Voice Prompt “Exit conguration”

Factory Default N/A

Execute Tap the (-) Button

To exit voice conguration menu and get back to stand-by mode, tap

the (+) Button until you hear a voice prompt, “Exit conguration”,

and tap the (-) Button to conrm.

14.2 Software Conguration Setting

You can change the settings of the headset through the Device

Manager or the Smartphone App.

14.2.1 Speed Dial (SC1 Advanced only)

Assign phone numbers for speed dialing to make a phone call quickly.

14.2.2 Audio Source Priority (Default: Intercom)

Audio Source Priority allows you to select the priority between the

intercom and music (which includes GPS app instructions and message

notications) from a smartphone. If the intercom is selected as the

audio source priority, your music will be interrupted during an intercom

conversation. If music is selected as the audio source priority, intercom

conversations will be interrupted while your music is heard.

Note:

Audio Source Priority is active only when Audio Multitasking is disabled.

14.2.3 Audio Boost (Default: Disable)

Enabling Audio Boost increases the overall maximum volume. Disabling

Audio Boost reduces the overall maximum volume, but delivers more

balanced sound.

14.2.4 VOX Phone (Default: Enable)

If this feature is enabled, you can answer incoming calls by voice. When

you hear a ringtone for an incoming call, you can answer the phone by

saying a word such as “Hello” loudly or by blowing air into the

microphone. VOX phone is temporarily disabled if you are connected to

intercom. If this feature is disabled, you have to tap the (+) Button to

answer an incoming call.

SCHUBERTH SC1 User Manual

Other manuals for SCHUBERTH SC1