To Next PageTo Next Page
Need help?Do you have a question about the Schulthess WT14 and is the answer not in the manual?
General| Brand | Schulthess |
|---|---|
| Model | WT14 |
| Category | Dryer |
| Language | English |
Access and set machine parameters via the service menu using specific codes.
Adjusts control system to machine size, setting values for temp, moisture, and drying times.
Adjusts control system to models; resets to default if changed.
Sets heating type (Electric, Steam, Hot Water) for appliances.
Enables solenoid for evaporator cleaning or manual condensate drainage.
Controls condensate drainage via Y-valve to container or external hose.
Configures welcome text and logo on display; allows custom company name.
Details payment system integration options: Card, Token, Coin, RS-485.
Blocks customer access to settings, except Language, Time, and Date.
Configures filter cleaning notification display after a set number of programmes.
Sets notifications for machine maintenance due; includes counter reset.
Determines if programmes automatically resume after a power interruption.
Tests drive motor, fan, and condensate pump for 2 minutes during production.
Tests various drying cycles (SFH HP, SFH C, AB HP) and displays temperatures.
Tests heating functions (SFH HP, SFH C, AB HP) and component activation.
Tests condensate pump operation for SFH HP, AB HP, and SFH C.
Tests drum reversing function for SFH model types.
Tests fan motor operation for SFH and AB specific models.
Tests moisture measurement by short-circuiting electrodes inside the drum.
Tests button functionality by displaying corresponding touch values.
Tests condensate pump, heat exchanger cleaning, and rinse valve for SFH HP/AB HP.
Accesses operating data via Settings menu using a specific code.
Lists operating data: errors, programmes, hours, software, machine number, last service.
Details plain text error messages, usually correctable by the user.
Details F-error messages that require correction by a service technician.
Lists plain text error messages, causes, and recommended reactions.
Lists F-error messages, causes, and recommended reactions for service.
Steps for control PCB replacement, including UI table and machine type setup.
Troubleshooting error messages during control PCB start-up after replacement.
Notes on re-configuring CRM14 system parameters after board replacement.
Procedure for power board replacement; no special settings are required.
