Schumacher SpeedCharge 7000A User Manual

Fully Automatic
Microprocessor Controlled
Battery Charger with
Engine Starter plus
Battery Tester and
Alternator Tester
CAUTION:
Read all Safety Rules and Operating Instructions,
and follow them with each use of this product.
0099000417/0204
OWNER’S MANUAL
Schumacher Electric Corporation
Mount Prospect, IL 60056 U.S.A.
Model 7000A
For 12-Volt Batteries
computer
smart
™
70
amp
RAPID
CHARGE
amp
ENGINE
START
amp
SLOW
CHARGE
2
20
Send Warranty Product Repairs to:
Customer Service Returns
P.O. Box 280,1025 E. Thompson, Hoopeston, IL 60942-0280
Questions? Call Customer Service: 1-800-621-5485

Schumacher SpeedCharge 7000A Specifications

General

Brand	Schumacher
Model	SpeedCharge 7000A
Category	Battery Charger
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

WARNING – RISK OF EXPLOSIVE GASES

Highlights the danger of explosive gases from lead-acid batteries and the need to follow instructions.

SAVE THESE INSTRUCTIONS

Lists crucial safety warnings and precautions for handling the product and batteries.

PERSONAL SAFETY PRECAUTIONS

Protective Gear and Environment

Emphasizes protective gear, ventilation, and prohibition of smoking near batteries.

Emergency Preparedness

Recommends having helpers, water/soap, and neutralizing spills for emergencies.

Battery Handling Precautions

Advises avoiding eye contact, not charging frozen batteries, removing metal, and avoiding tool drops.

PREPARING TO USE THE BATTERY CHARGER

Electrical Setup and Requirements

Covers plugging into a 120V AC receptacle and using extension cords.

Battery and Environment Preparation

Details battery type, cleaning terminals, adding water, safety glasses, and ventilation.

OPERATING THE BATTERY CHARGER

Charging in Vehicle

Provides step-by-step instructions for charging a battery while it remains in the vehicle.

Connecting and Disconnecting Clamps

Explains how to connect clamps to negative/positive grounded systems and disconnect safely.

Powering Up and Setting Charge

Guides on plugging in the charger and selecting the desired charge rate and battery type.

CHARGING BATTERY AND ENGINE START

Charging Removed Battery Steps

Details connecting clamps to a removed battery, plugging in, and safe disconnection.

Engine Start Procedure

Outlines using the engine start function, including cranking and disconnecting.

CHARGER CONTROL PANEL

Display Mode Selection

Explains the function of the display mode switch for the digital LED.

Charge Rate Selection

Describes the options for selecting the charge rate (2A, 20A, 70A START).

Battery Type Selection

Details the battery types that can be selected (REGULAR, DEEP CYCLE, AGM, GEL).

CONTROL PANEL GUIDE

Mode of Operation Descriptions

Explains the various operating modes and their corresponding LED indicators.

Digital Display and LED Indicators

Describes what the digital display shows and the role of LEDs.

LED Status Interpretation

Clarifies the meaning of solid (O) and blinking (B) LEDs in different modes.

BUILT-IN BATTERY TESTER FUNCTIONS

Tester Overview and Calculation

Introduces the tester, its capabilities, and initial calculation display.

Testing Sequence and Status LEDs

Outlines the steps for testing and explains the status LEDs in tester mode.

Battery % Reading Considerations

Provides notes on interpreting battery percentage readings and potential inaccuracies.

ALTERNATOR TESTER AND ENGINE STARTER

Alternator Tester Guide

Explains the alternator tester, its sequence, status LEDs, and testing notes.

Engine Starter Guide

Covers the overview and starting sequence for using the engine starter function.

USING YOUR BATTERY CHARGER

Charging Process and Indicators

Details the charging process, including CHECK and CHARGING LEDs.

Special Charging Modes

Explains automatic shut-off, aborted charges, and desulfation mode.

CHARGING TIPS

Starting a Vehicle

Advice on charging a battery just enough to start a vehicle.

Partial Charging for Operation

Guidance on charging a battery sufficiently for vehicle operation, not full charge.

Resuming Interrupted Charges

Explains how to resume or complete a previously interrupted charging session.

BATTERY PERCENT AND CHARGE TIME

Factors Influencing Charge Duration

Details how battery state, rating, and charge rate affect charging time.

Interpreting Battery % Readings

Explains the meaning of battery percentage readings at different stages of charging.

TROUBLESHOOTING AND MAINTENANCE

Common Charging Problems

Addresses issues like the charger not charging and the CHECK light flashing.

Performance and Indicator Issues

Troubleshoots erratic lights, short crank times, and quick CHARGED light activation.

Care and Storage Practices

Covers cleaning clamps, coiling cords, and general exterior cleaning.

LIMITED WARRANTY INFORMATION

Warranty Coverage and Terms

Outlines the five-year limited warranty for defects in material or workmanship.

Exclusions and Disclaimers

Lists conditions voiding the warranty and manufacturer disclaimers.

Warranty Validation Process

Explains the requirement to complete and mail a warranty validation card.