Assembly
08.00 | MPG-plus | Assembly and operating manual | en | 0389216
23
5.3 Mounting the sensor
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
• For the exact type designations of suitable sensors, please see
catalog datasheet and Link Übersicht Sensoren.
• For technical data for the suitable sensors, see Assembly and
Operating Manual and catalog datasheet.
– The Assembly and Operating Manual and catalog datasheet
are included in the scope of delivery for the sensors and are
available at
www.de.schunk.com.
• Information on handling sensors is available at
www.de.schunk.com or from SCHUNK contact persons.
To Next Page
Loading...
