Schwank ThermoControl Plus 4 User Manual

- 16 -
4.6 Manual operation
FI
X
Use the
FI
X
button to select different operating modes.
4.7 Button for service maintenance mode
To change the FIX
mode push the
FI
X
button.
Press DISP when the desired operation mode
appears (for example: continuous FIX mode). The
control-unit switches back to the main display and the
selected mode is activated.
night-temperature mode
day-temperature mode
freeze protection temperature
For service or maintenance, to have the heater(s) in full
operation regardless of the current room temperature, push
the
button. Switch back to the base display mode by
pushing this button again.
Push
FI
X
to return to the main display.

Schwank ThermoControl Plus 4 Specifications

General

Brand	Schwank
Model	ThermoControl Plus 4
Category	Controller
Language	English