Schwank ThermoControl Plus 4 User Manual

- 31 -
Holiday Programming: When modifying the holiday program
the “ERROR“ signal will appear if the starting(A) or ending(B)
dates or calendar data are in conflict. (for example: the end
date is earlier than the start date of a holiday period) In case of
data entry error, the holiday program won’t activate.
This display represents a very rare error: a button on the front
panel is jammed in the depressed position.
Please check button orientations!

Schwank ThermoControl Plus 4 Specifications

General

Brand	Schwank
Model	ThermoControl Plus 4
Category	Controller
Language	English