EasyManua.ls Logo

Schweizer 300CB - Load Limits and Balance Criteria; Equipment Removal or Installation

Default Icon
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Weight and Balance
Pilot’s Flight Manual
6-3. LOAD LIMITS AND BALANCE CRITERIA
1. The Schweizer S-300CB Model 269C-1 helicopter was designed
to the loading limitations noted in paragraph 6-2.
Note: Do not exceed these limitations at any time during flight.
2. The delivered weight (the term “delivered weight” includes oil
and trapped fuel), recorded in the Weight and Balance Record
inserted in this section, shall be used to perform all weight and
balance computations (see Fig ures 6-4 and 6-5).
7-4. EQUIPMENT REMOVAL OR INSTALLATION
1. Removal or addition of equipment must be entered in the helico-
pter log book and shall be come part of the helicopter file.
2. The weight and balance effects of these changes must also be re -
corded in the Weight and Balance Record inserted in this section.
3. Use the station diagram shown in Figure 6-2 and the Balance
Diagram shown in Figure 6-3 as an aid for weight and balance
changes.
6-8 Reissued: 16 Jan 2019
SCHWEIZER
Model 269C-1 Helicopter
CSP book 2..indd 130 8/4/19 12:54 PM

Table of Contents

Other manuals for Schweizer 300CB

Related product manuals