WARNING
DO NOT EXCEED ENGINE/AIRCRAFT LIMITS.
Accessories required for safe flight should be operated during each
check.
WARNING
MAINTAIN SEPARATION FROM OBJECTS IN AIR OR ON
THE GROUND.
Reset altimeter if required after obtaining pressure altitude (or read
pressure from Davtron Indicator).
NOTE:
Best power check data is obtained at 61.7 psi torque or
810°C TOT. Allow engine to stabilize at least one minute at the test
power setting before recording data.
EXAMPLE:
WANTED - Check engine performance;
DATA OBTAINED DURING FLIGHT:
Torque = 54 psig
TOT = 650°C
PA = 6000 feet
OAT = 10°C
Performance
Schweizer RSG, LLC.
Model 269D Helicopter
Pilot's Flight Manual
5-11
R
eissued: 16 Jan 2019
FAA Approved
Book 3.indd 135 8/4/19 1:25 PM
To Next Page
Loading...
