CAUTION
When balancing/moving the helicopter by hand, do not push on
stabilizers or any other component or surface that may sustain
damage from ground handling or pushing. If helicopter is
moved in the aft direction (rearward) do not drag skid heels o n
the ground and avoid deep depressions in the ground surface.
Damage to landing gear components may occur if heels catch
on a rough surface or the wheels drop into a deep depression.
Move helicopter on ground by manually balancing on ground
handling wheels and pushing on tail rotor transmission housing and
any other sturdy structural members of helicopter (i.e. access doors
may be opened and assistant may push on adjacent frames and solid
structures).
Handling, Servicing & Maint.
Pilot's Flight Manual
Schweizer RSG, LLC.
Model 269D Helicopter
7-44
R
eissued: 16 Jan 2019
Book 3.indd 208 8/4/19 1:25 PM
To Next Page
Loading...
