Schwinn 490e - Using the JRNY App with Your Machine; USB Charging; Bluetooth Audio (Input)

7
CONNECTIVITY
Using the “JRNY™” App with Your machine
ThistnessmachineisequippedwithBluetooth
®
connectivity and can be wirelessly connected for workouts using the
“JRNY™” app. The app can be accessed with your JRNY™ membership.
Note: Do not connect this machine through your Bluetooth
®
settings on your device. Simply download the app, start
a workout, and follow the instructions on the app.
1. Download the app named JRNY
™
. The app is available on the App Store and Google Play™.
Note: For a complete list of supported devices, review the app on the App Store or Google Play™.
2. Install the app.
3. Open the “JRNY™” app, and follow the instructions.
4. When done, tap on the red Bluetooth
®
icon in the upper right corner of the display.
Note: If Bluetooth
®
is not active on your device, follow the instructions to activate it.
5. A list of available machines will be displayed. Select your machine from the list of available machines.
6. The JRNY™ app is now ready for use.
Note: Once a Bluetooth
®
Heart Rate device is connected, that device is engaged to that machine. To use the Heart
Rate device elsewhere, it must be disconnected. Follow the instructions provided in the app to disconnect.
USB Charging
If a USB Device is attached to the USB Port, the Port will attempt to charge the device. The power supplied from the USB
Port may not be enough to operate the device and charge it at the same time.
Bluetooth
®
Audio (Input)
Your machine is able to play audio across a Bluetooth
®
connection from your smart device through the console speakers.
Note: Bluetooth
®
audio can only be streamed into the console.
Bluetooth
®
Low Energy (BLE) Heart Rate Monitor (not supplied)
YourtnessmachineisequippedtobeabletoreceiveasignalfromaBluetooth
®
Low Energy (BLE) Heart Rate (HR)
Monitor. When connected, the Console will display the Bluetooth
®
Heart Rate Monitor Connected icon. Follow the
instructions provided with your Bluetooth
®
Low Energy (BLE) Heart Rate Monitor.
If you have a pacemaker or other implanted electronic device, consult your doctor before using a Bluetooth
®
Heart Rate Monitor.
Note: Be sure to remove the protective cover (if provided) from the Heart Rate Sensor before use.
1. Put on your Bluetooth
®
Low Energy (BLE) Heart Rate monitor and activate it.
2. TheConsolewillactivelysearchforanymonitorsinthearea,andwillrapidlyashtheBluetooth
®
Heart Rate Monitor
*AJRNY™membershipisrequiredfortheJRNY™experience–seewww.schwinntness.com/jrnyfordetails.For
United States and Canada customers, you can obtain a JRNY™ membership by calling 888-986-5528 or visiting
www.schwinntness.com/jrny.Whereavailable(includingtheUnitedStates),youcanalsoobtainaJRNY™membership
by downloading the JRNY™ app onto your phone or tablet and signing up within the downloaded app. JRNY™
memberships may not be available in all countries.