Schwinn 840 - Page 31

Circuit #2
Youset the maximumincline, andthe treadmill adjusts as shown in this profile. Youcan manually adjust the speed.
ECZECZ_ _ CC1ECi [CC]ECZCCC]_ _ _
_ ECC]ECC]CZC]CC1CC] _ CC] EC] CC] CC1CC1
Circuit #3 (model860 only)
The Incline profile shows in the ProgramSelection menu. After you set the time, you can set the maximumincline or speed, and
the treadmill adjusts as shown inthese profiles.
Pursuit #1
Youset the maximumspeed, and the treadmill adjusts as shown in this profile.
ECZECZECi _ _ ECi [CC]ECZ_ ECi _ _
_ ECC]ECC]CCC]CC1_ _ _ EC] [CC]CC1CC1
CC] ECCICC]CCC;CC] CC] CC] CC] CC] CC] _ _
CC] CCZCCC]CCZCC] CC] CCC]CC] CC1CCC]_ _
_ ECZCC] CCC]CC1C_ ECC]_ C_ _ CCB!
Pursuit #2
Youset the maximumincline, andthe treadmill adjusts as shown in this profile. Youcan manually adjust the speed.
ECZECZ_ _ CC1EC_[CC]EC__ _ _ _
_ ECC]ECC]CCC]CC__ _ _ EC] _ CC_CC_
CC] ECCICC]CC] CC] CC] CC] CC] CC] CC] _ _
Pursuit #3 (model 860only)
The Incline profile shows in the ProgramSelection menu. After you set the time, you can set the maximumincline or speed, and
the treadmill adjusts as shown inthese profiles.
31