5
Chain Lubrication
Do not apply lubricant when the chain is moving.
Be sure to keep fingers clear of all pinch hazards.
Remove the chain guard door and apply a small amount of lithium grease to the chain (C).
Note: Use caution to avoid staining clothes or carpet.
Replacing the Console Batteries
The Console display will show “Batt” during power up if the battery level is low.
When replacing the batteries, make sure the batteries point in the +/– direction
shown in the battery bay.
Note: The console uses AA size batteries (LR6).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd,
Ni-MH, etc) batteries.
Be sure to remove the batteries to prevent corrosion damage if you are not going to
use the machine for an extended period of time.
+
-
X2
C
To Next Page
Loading...
